This is a type on the palm the advanced special-purpose electric current of automobile current clamp nowadays,
designs for the complicated automobile electronic system.
Accurate and High Resolution
23mm Conductor Diameter
One Touch Zero
Seperated Power-on and Lower Battery LEDs
Connect to an Oscilloscope for waveform observation
Connect to a Datalogger/DMM for recording or monitoring
Suggestion selling price:NT$4,500
Lead diameter |
Maximum 23 ¢P | ||
Battery type |
No.3 AA 1.5 V | ||
Power consumption |
Approx. 6 mA | ||
Low battery indication |
If battery voltage too low, indicator is showed. | ||
Operating temperature |
-10 ¢J ~ 50 ¢J | ||
Operating humidity |
< 85% (relative humidity) | ||
Storage temperature |
-20 ¢J ~ 60 ¢J | ||
Storage humidity |
< 75% (relative humidity) | ||
Dimension |
183 mm(L) ¡Ñ 61.3 mm(W) ¡Ñ 35.6 mm(H) | ||
Weight |
190 g (battery included) | ||
| Range |
Output |
Conversion |
Accuracy |
| DCA 0 ~ 40A |
DC 10mV/A |
0.1A/mVDC |
¡Ó1.0%¡Ó0.02A |
| ¡Ó1.0%¡Ó0.02A |
DC 1mV/A |
1A/mVDC |
¡Ó1.0%¡Ó0.2A |
| DCA 150 ~ 200A |
DC 1mV/A |
1A/mVDC |
¡Ó2.2%¡Ó0.2A |
| ACA 0 ~ 4A |
AC 100mV/A |
10mA/mVAC |
¡Ó2.0%¡Ó0.005A |
| ACA 0 ~ 40A |
AC 10mV/A |
0.11mA/mVAC |
¡Ó1.5%¡Ó0.03A |
| ACA 0 ~ 150A |
AC 1mV/A |
1mA/mVAC |
¡Ó1.5%¡Ó0.3A |
| ACA 150 ~ 200A |
AC 1mV/A |
1mA/mVAC |
¡Ó2.2%¡Ó0.3A |
 |
|||
| 1. | Fixed mount of current sensing | When measure AC/DC current, have to put the round conductor into fixed mount. | |
| 2. | Movable mount | Press the movable button to open this mount. | |
| 3. | One touch zero button | When measure the current, have to press the zero button first to delete the past value. | |
| 4. | Open/ Close switch & turntable shift located selection |
Can revolve the turntable shift for your requested range. | |
| 5. | Power indicator | When turn on the current probe, power indicator is lighting. | |
| 6. | Low battery indicator | Lights when low voltage | |
| 7. | Outlet terminal | Outlet voltage. The signal is red terminal, the black terminal function is ground. | |
| 8. | Wrist belt | Prevent to current probe fall and cause damage. | |
| 1. | Measure AC current. | |
| 2. | Battery leakage current measurement. | |
| 3. | Measure consumption of motor fan. | |
| 4. | Measure the battery charge value. | |
| 5. | Measure consumption of car motor pump. | |
| 6. | Measure consumption of compressor magnetic valve. | |
| 7. | Measure total power value of generator. | |
| 8. | Measure consumption of start motor. |